charge-code

This command configures the Charge Codes table, which lets you define metering tones.

Syntax

(config-voip)# gateway dtmf-supp-service charge-code <Index> 
(charge-code-<Index>)# 

Command	Description
Index	Defines the table row index.
charge-code-name	Defines a descriptive name.
end-time-1, end-time-2, end-time-3, end-time-4	Defines the end of the time period in a 24 hour format.
pulse-interval-1, pulse-interval-2, pulse-interval-3, pulse-interval-4	Defines the time interval between pulses (in tenths of a second).
pulses-on-answer-1, pulses-on-answer-2, pulses-on-answer-3, pulses-on-answer-4	Defines the number of pulses that the device generates upon call answer.

Command Mode

Privileged User

Example

This example configures a Charge Code:

(config-voip)# gateway dtmf-supp-service charge-code 0
(charge-code-0)# charge-code-name INT
(charge-code-0)# end-time-1 04
(charge-code-0)# pulse-interval-1 2
(charge-code-0)# activate